With the more and more extensive application of electronic products, now the solder welding process in the electronic industry as an important part of the electronic processing, in this case is also more and more concerned by the market. Therefore, all kinds of tin welding technology more and more attention. The following for everyone to say the operation of laser soldering machine matters needing attention?

When the laser soldering machine is working, we need to pay attention to ensure that the main body of the solder is fixed to prevent accidental sliding out. Because the process requires the use of temperature and laser two adverse characteristics, so in laser welding need to ensure that the solder body firmly fixed. If his body is not fixed at this time, it may cause deviation, damage other products, and more serious may cause physical injury to the operator or passers-by.

Of course, we need to pay attention to the use of laser soldering machine with temperature feedback to ensure stable levels. Since the temperature needs to be kept at the same level during the process, it is necessary to pay attention to the use of laser soldering machine with temperature feedback as an aid in welding. Only by paying attention to the temperature change in real time can we adjust the temperature interval better under the right conditions. This temperature feedback is actually an important means to ensure the amount of laser soldering machine. Also pay attention to adjust the tin content to a fixed value, in order to increase the aesthetic feeling.

Laser soldering machine also needs to require personal protection when operating. Personal protection mainly refers to the wearing of fireproof and heat-resistant laser protective clothing, laser protective glasses that can selectively attenuate specific laser wavelengths, laser protective masks for ultraviolet laser sources, and the wearing of laser protective gloves to avoid direct or scattered laser. Damage. Safety management is also important. Because safety management mainly includes setting up special institutions or personnel, clear responsibilities and rights, including safety training and supervision. This is mainly because of its high degree of automation, simple welding process. Non-contact operation mode, meet the requirements of clean and environmental protection.

Processing the workpiece with laser soldering machine can improve the work efficiency, the finished workpiece appearance is beautiful, the weld is small, the depth is large, the laser soldering machine is of high quality. Engineering controls should also be considered. Safety measures taken in the structure mainly include protective covers to prevent workers from receiving more than the maximum allowable exposure; Safety interlock means an automatic device connected to the shield to avoid radiation when the shield is removed; Close the safety optical path that may cause combustion or secondary radiation due to exposure; The key switch usually means that the laser is turned on after the key is removed.

After the introduction of the above content, we have also understood the precautions for the operation of laser soldering machine. There will be more updates on other topics next time, so be sure to check them out if you have time.